Name: MAX3097EEEE MAX3097 EEEE Triple Receiver IC Maxim
Price: 7.25 USD
Availability: InStock

Description

Triple Receivers
Fault Detection
ESD Protection
Package: 16 Pin QSOP

The MAX3097E is comprised of 3 high speed RS485/RS-422 receivers that have fault-detection and fault status features. Should the device not be in a valid state it will be detected by the fault thresholds on the receiver's inputs. This device detects the following RS-485 faults: open circuit condition, short circuit condition, low differential voltage and common-mode range violation.
A capacitor-programmable delay on the fault circuitry helps ensure there aren't any fault errors even at slow data rates. The receivers can each accept data up to a 32Mbps rate.

Features:
ESD Protection
- �15kV�Human Body Model
- �15kV�IEC 1000-4-2, Air-Gap Discharge Method
- �8kV�IEC 1000-4-2, Contact Discharge Method
Single +3V to +5.5V Operation
-10V to +13.2V Extended Common-Mode Range
Independent and Universal Fault Outputs

Electrical Characteristics
(VCC = +3V to +5.5V, TA = TMIN to TMAX , unless otherwise noted)
(Typical values @ Vcc=5V,TA=25�C):

Supply Voltage Range: 3.0v min. ; 5.5V max.
Supply Current(No Load0: 3.1mA typ.
Receiver Differential Threshold Voltage: -200mV min. ; 200mV max.
- (-10V ≤ VCM ≤ 13.2V)
Receiver Input Hysteresis: 40mV
- (-10V ≤ VCM ≤ 13.2V)
Receiver Input Resistance: 90kΩ min. ; 160kΩ max.
- (-10V ≤ VCM ≤ 13.2V)
Output Short-Circuit Current: �105mA max.
- (0 ≤ VRO ≤ VCC)

Applications:
RS-485/RS-422 Receivers for Motor-Shaft Encoders
High-Speed, Triple RS-485/RS-422 Receiver with Extended ESD
Telecommunications
Embedded Systems

Manufactured by: Maxim
Part Number: MAX3097 EEEE

Full Datasheet: MAX3097 EEEE

Our Price: $7.25

Description

Manufacturer

Part Number