Those who like indoor plants know how important it is to maintain a proper atmosphere for the plants to grow happily. Only a few parameters are important – air humidity, air temperature and soil moisture apart from adequate sunshine. However, it is rare for people to be able to monitor the health and well-being of their flora personally, given the busy schedules.
That is where a single board computer such as the Raspberry Pi or RBPi can help. Being flexible in setting up and connecting to the various sensors necessary, this SBC not only looks after the plants, but also alerts you with SMS and via email whenever the situation differs from the normal. This project also has an app, Plant Friends, for your Android phone, so that you are up to date on the real-time and historical parameter data on your plants. The project consists of three main components – the sensor nodes, the base station and the app.
You need a sensor node for each plant. Each of these sensor nodes consist of an Arduino clone called Moteino fitted with an RF transceiver, a battery meter, a temperature sensor, a humidity sensor and a sensor for soil moisture. The sensor nodes collect the readings from all the sensors and transmit the data using the transceiver to the base station. The sensors and the base station are connected via the 915MHz ISM band.
For this project, users must be slightly above the beginner level. Some basic experience with Arduino hardware and Arduino IDE will be necessary – for installing libraries, making LEDs blink, etc. Additionally, experience in wielding a soldering iron is also necessary. On the RBPi side, it is essential to be familiar with the basic knowledge of the SBC and with installing the Raspbian OS.
The Plant Friends system has several advantages. It reminds you to water your plants and sends you an alert via email and/or SMS. It works for multiple plants at the same time, even if they are in different rooms of your home. Since wires are a minimum and all components of the system are of a reasonable size, you can move the plants and the system freely about the home.
The entire system consumes low power and therefore runs on batteries. Typically, battery swaps are necessary every 4 to 6 months. The electronics is low-maintenance as it is housed in a moisture-proof enclosure. The best part of the system is the Android app, as it allows monitoring from anywhere in the world.
An RBPi, model B, is used for the project, although a model A will work equally well. However, model B has more RAM and an Ethernet port, which may be necessary for flexibility. A USB Wi-Fi adapter helps to connect to the internet.
For each sensor node, you will need a holder for four AA type rechargeable batteries. In addition, you will need a combined sensor for temperature and humidity. For sensing the moisture in the soil, you may use a soil probe consisting of a PCB with exposed traces. However, ensure there is no lead involved.
